Изберете език

Gas-Pro IR

Производител: Crowcon
ATEX Certificate
IECEx Certificate
IECEx Certificate
MED Certificate Module B
IEXEx Charging & Accessories Certificate
ATEX Charging & Accessories Certificate
UKCA (UKEX) Certificate
UK MED Certificate Module B
Gas-Pro – US English (Letter Size)
Gas Pro Manual – British English

The Gas-Pro IR is ideal for the oil and gas industry. This personal multi–gas monitor solves the challenges faced by traditional pellistor catalytic sensors, detecting gases such as methane, pentane or propane using infrared (IR) technology even in low oxygen environments.

Harness the power of infrared (IR) technology for additional peace of mind across your site with the Gas-Pro IR portable detector.

The infrared measurement gives improved reliability and measures gas in two different wavelengths: one that absorbs gas and the other does not. The %LEL of gas present is determined by the difference in intensity between the beams measured by the photo-receiver.

With little chance of being poisoned, the Gas-Pro IR personal multi gas detector is inherently safer than traditional pellistor catalytic sensors, and saves the need of regular and expensive pellistor replacement when used in likely contaminated environments.

Simple to use and with easy testing and calibration, the Gas-Pro IR now completes the Gas-Pro range and gives greater flexibility for sensor selection in this 5-gas multi gas detector.

  • Detects up to 5 gases
  • Reduced risk of device poisoning
  • Intuitive functionality
  • Portable & durable
  • 14+ hour battery life

IR Technology

  • Ultra-reliable IR technology can handle environments which can cause pellistor-based sensors to fail, for enhanced protection
  • Operates even in oxygen-free environments, without compromising sensitivity
  • Fail-safe, providing measures in %LEL
  • Certified for use in hazardous areas as defined by both ATEX/IECEx and UL

User Friendly

  • Top mount display for easy data reading at a glance
  • Simple single-button operation making it easy-to-use even whilst wearing gloves
  • Intuitive functionality means minimal training required

Adaptable

  • Monitor up to 5 different gases, including oxygen depletion, in a single compact detector
  • Pumped and diffusion solution options
  • Multi-language selection
  • Automatic fail-safe flow plate recognition means no more pre-entry testing needed
  • Specific and unique Pre-Entry Check (PEC) mode

Reliable

  • Reliable lithium-ion battery for over 14 hr use from a 7.5 hr charge
  • Water and dust resistant to IP65 and IP67, ideal for harsh environments
  • Bump and calibration reminders to ensure you’re always fully compliant
Size 43 x 130 x 84mm (1.7 x 5.1 x 3.3ins)
Weight 309g 4 gas (10.8oz)/ 340g pumped (11.9oz)
333g 5 gas (11.7oz)/ 362g pumped (12.7oz)
Alarms Audible >95dB @ 30cm (98dB @30cm in loud mode)
Visual – all angle dual red/blue LEDs
Vibrating alert
Display Top mount for ease of view with dual colour backlight (green/red)
Data logging 125 hr at 10-second intervals (45,000 logs)
Event logging Alarm, over range, calibration, bump, on/off, TWA, 1000 events
Battery Rechargeable Li-ion, >14 hr (13 hr pumped operation) based on CH4, O2, H2S, CO
Typical charge time 7.5 hr
Sampling Internal pump as option
Operating temperature -20°C to +55°C (-4°F to +131°F)
Storage -20°C to +65°C (-4°F to +149°F)
Humidity 10 to 95% RH
Ingress protection Independently tested to IP65
Approvals

IECEx: Ex db ia IIC T4 Gb Tamb -20°C to +55°C
ATEX and UKCA: II 2 G Ex db ia IIC T4 Gb Tamb -20°C to +55°C
UL: Class 1, Division 1, Groups A, B, C, and D UL 913, UL 60079-0 and UL 60079-11
INMETRO: Ex db ia IIC T4 Gb Tamb -20°C to +55°C

MED Directive 2014/90/EU

UKCA MED (MSN1874)

Compliance FCC and CE
Complies with EMC Directive 2014/30/EU
EN50270 and ICES-003
Interface Data connection for gas test solutions and direct to PC
Charging Direct connection to multiregional power supply
Vehicle charger adaptor
Desktop cradle
USB power and communications lead
Crowcon Connect Compatible? Yes
Gas Range Typical Alarms Resolution
PID  0-1000ppm  50ppm  1ppm
Ammonia (NH3)  0-100ppm  25ppm  1ppm
Ammonia (NH3)  0-1000ppm  N/A  1ppm
Carbon dioxide (CO2)  0-5% vol.  0-5% vol.  0.01% vol.
Carbon monoxide (CO)  0-2000ppm  20ppm  1ppm
Carbon monoxide (CO)  0-500ppm  20ppm  1ppm
Carbon monoxide
(hydrogen filtered)
 0-2000ppm  20ppm  1ppm
Chlorine (Cl2)  0 – 5ppm  0.5ppm  0.1ppm
Dual toxic (CO-H2S) H2S 0-100ppm
CO 0-500ppm
 5ppm
20ppm
 1ppm
1ppm
Flammable  0-100% LEL  20% LEL  1% LEL
Hydrogen (H2)  0-1000ppm  N/A  1ppm
Hydrogen sulphide (H2S)  0-100ppm  5ppm  1ppm
Nitrogen dioxide (NO2)  0-20ppm  1ppm  0.5ppm
Oxygen (O2)  0-25% vol.  19.5% / 23.5% vol.  0.1% vol.
Ozone (O3)  0-1ppm  0.1ppm  0.01ppm
Sulpher dioxide (SO2)  0-20ppm  1ppm  0.1ppm
Chlorine dioxide (ClO2)  0-1ppm  0.1ppm  0.1ppm
Nitric oxide (NO)  0-100ppm  1ppm  1ppm
Copyright MAXXmarketing GmbH
JoomShopping Download & Support